Advanced Wireless Settings - Black Box 11N 2T2R Manual

3.6 Advanced Wireless Settings

This wireless access point has many advanced wireless features.
NOTE: All settings listed here are for experienced users only. If you're not sure about the meaning and function of these settings,
don't modify them, or the wireless performance will be adversely affected.
Click on Advanced Setting on the left to enter the Advanced Settings screen. The following message will be displayed:
Option
Fragment Threshold
RTS Threshold
Beacon Interval
DTIM Period
Data Rate
N Data Rate
Figure 3-27. Advanced settings screen.
Table 3-12. Advanced Settings screen options.
Description
Sets the wireless radio's Fragment threshold. Do not modify the default value if you don't
know what it is; the default value is 2346.
Sets the wireless radio's RTS threshold. Do not modify the default value if you don't know
what it is; the default value is 2347.
Sets the wireless radio's beacon interval. Do not modify the default value if you don't know
what it is; the default value is 100.
Sets the wireless radio's DTIM period. Do not modify the default value if you don't know what
it is; the default value is 3.
Sets the wireless data transfer rate to a certain value. Since most wireless devices will negotiate
with each other and pick a proper data transfer rate automatically, you don't need to change
this value unless you know what will happen after modification.
Sets the 802.11 Draft-N clients' data rate. Available options are MCS 0 to MCS 15. It's safe to
set this option to Auto. Don't change this value unless you know what will happen after you
modify it.
Chapter 3: Installation and Configuration
Page 35