Black Box 11N 2T2R Manual page 33

11N 2T2R Wireless Access Point
Option
Band
MAIN SSID
Multiple ESSID
Channel Number
Associated Clients
Root AP SSID
Select Site Survey
After you finish the settings, click on the Apply button, and the following message will be displayed:
Page 32
Table 3-10. Universal repeater options.
Description
Select the wireless band you want to use. Selecting different band settings enables you to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless
band you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to this access
point.
If you select 2.4GHz (B+G), then only wireless clients using the 802.11b and 802.11g band will
be able to connect to this access point.
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this access
point, select 2.4GHz (B+G+N).
Please input the ESSID (the name used to identify this wireless access point) here. You can
input up to 32 alphanumerical characters
NOTE: ESSID IS CASE SENSITIVE.
The access point supports multiple SSID functions; up to four SSIDs can be set. If you want to
configure additional SSIDs, click on this button.
Select a channel number you want to use. The channel number must be the same as another
wireless access point you want to connect.
Click on the Show Active Clients button. A new popup window will appear that contains the
information about all wireless clients connected to this access point. You can click on the
Refresh button in the popup window to keep information up to date.
In Universal Repeater mode, this device acts as a station to connect to a root AP. Assign the
root AP's SSID here or click on the Select Site Survey button to choose a Root AP.
Click on the Select Site Survey button, and a Wireless Site Survey Table pops up. It lists all avail-
able access points nearby. Select one access point in the table and the access point will join the
wireless LAN through this access point.
Figure 3-25. Settings saved successfully prompt.
724-746-5500 | blackbox.com