2.7 Back Panel
The Wireless Access Point's back panel is shown in Figure 2-2. Table 2-2 describes its components.
Number
Component
4
Antennas
5
Power connector
6
RJ-45 connector
7
Reset/WPS
4
7
Figure 2-2. Back panel.
Table 2-2. Back panel components.
Description
Included detachable 3-dBi antennas connect here.
Connects to an A/C power adapter.
Local Area Network (LAN) port.
Resets the router to its factory default settings (clears all settings), or starts
the WPS function. Press and hold this button for 10 seconds to restore all set-
tings to factory defaults. Press and hold this button for less than 5 seconds to
start the WPS function.
5
6
Chapter 2: Overview
4
Page 11