Black Box 11N 2T2R Manual page 47

11N 2T2R Wireless Access Point
To set up MAC filtering, click MAC Filtering on the left of the Web management interface and the following screen will be dis-
played:
This page contains two parts of MAC filtering information. All allowed MAC addresses will be listed in the upper part (1), and you
can add new MAC addresses by components in the lower part (2).
Option Description
Select Check this box to select one or more MAC address(es) to delete.
Delete Selected Click on this button to delete all selected MAC address(es).
Delete All Delete all MAC address entries.
Reset Uncheck all selected MAC address entries.
Enable Wireless Check this box to enable MAC address restriction. If unchecked, no restriction will be enforced (any
Access Control wireless client with the proper encryption setting will be able to connect to this wireless access point).
MAC Address Input the MAC address allowed using this wireless access point here. You don't have to add a colon (:)
or a hyphen (-), just input 0 to 9 and a to f, for example, 112233445566 or aabbccddeeff.
Comment Input any text here as comments for this MAC address, such as ROOM 2A Computer. You can input up
to 16 alphanumerical characters. This is optional and you can leave it blank, however, we recommend
using this field to write a comment for every MAC addresses as a memory aid.
Add When you finish inputting the MAC address and (optional) comment, click on this button to add the
MAC address to the list.
Clear Remove all characters in the MAC address and Comments field.
Page 46
Figure 3-43. MAC address filtering table screen.
Table 3-18. MAC address filtering table options.
724-746-5500 | blackbox.com