Service Manual – SC100 - Scrubtec 130
Cylindrical Brush System
Removal and Installation
Belt and Pulley Disassembly/Assembly
Disassembly
1
Set the machine to stop position
2
Make sure that the machine power supply cable is disconnected from the electrical mains
3
Remove the tank assembly
4
Remove the brush
5
Remove two squeegee bars
6
On the lower side of the deck, remove the screws (A)
7
Turn the machine to its original position (B)
8
Press the unlock pedal (C) and fully lower the frame (D)
A
A
A
D
C
Cylindrical Brush System
B
37