Table of Contents
Advertisement
Quick Links
Manual Steering Models
Manual Steering Models
Manual Steering Models
Manual Steering Models
Manual Steering Models
SCRUBTEC R 571
SCRUBTEC R 571
SCRUBTEC R 571
SCRUBTEC R 571
SCRUBTEC R 571
SCRUBTEC R 571 C
SCRUBTEC R 571 C
SCRUBTEC R 571 C
SCRUBTEC R 571 C
SCRUBTEC R 571 C
SCRUBTEC R 586
SCRUBTEC R 586
SCRUBTEC R 586
SCRUBTEC R 586
SCRUBTEC R 586
SCRUBTEC
SCRUBTEC
SCRUBTEC
SCRUBTEC
SCRUBTEC
Operator's Manual
and Parts List
U.S. Patent No. 6,105,192; No. RE39,581;
No. 6,557,207; No. 7,185,397; and Patents Pending
EN
English (2-29)
Parts List (31-69)
Form No. 71274A
3/08, Revised 12/08
R
R
R
R
R
READ THIS MANUAL
Printed in the U.S.A.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nilfisk-ALTO SCRUBTEC R 571
Summary of Contents for Nilfisk-ALTO SCRUBTEC R 571
- Page 1 Manual Steering Models SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 586...
-
Page 2: Table Of Contents
READ THIS BOOK CAUTION: Read the Operator's Manual before using the appliance. This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Nilfisk ALTO machine could result in injury to you or to other personnel;... -
Page 3: Operator Safety Instructions
OPERATOR SAFETY INSTRUCTIONS DANGER: Failure to read and observe all DANGER statements could result in severe bodily injury or death. Read and observe all DANGER statements found in your Owner's Manual and on your machine. WARNING: Failure to read and observe all WARNING statements could result in injury to you or to other personnel;... - Page 4 WARNING: Any alterations or modifications of this machine could result in damage to the machine or injury to the operator or other bystanders. Alterations or modifications not authorized by the manufacturer voids any and all warranties and liabilities. WARNING: Electrical components of this machine can "short-out" if exposed to water or moisture. Keep the electrical components of the machine dry.
-
Page 5: Introduction & Machine Specifications
During its forward movement, it picks up the removed dirt and the detergent solution which has not been absorbed by the floor. ® Model SCRUBTEC R 571 SCRUBTEC R 586 SCRUBTEC R 571 C SCRUBTEC BOOST Part Number Cleaning Swath 28” (71.1 cm) 34” (86.4 cm) 28”... -
Page 6: Symbols Used On Scrubtec
Symbols Used On Scrubtec R Forward / Reverse Brush Up/Down Squeegee Up/Down Horn Solution Flow Switch On/Off Switch Battery Meter Recovery / Solution LED WARNING READ OPERATOR'S LCD Display MANUAL BEFORE OPERATING Button THIS MACHINE RISK OF FIRE • Use only commercially available floor cleaners and waxes intended for machine operation. -
Page 7: Display Screens For Scrubtec
Display Screens For Scrubtec R Position arrow indicating current position Traverse speed indicator of squeegee (up or down) 1 = low 0-3 KPH 2 = med 0-5 KPH 3 = high 0-6.4 KPH Indicators are on, showing current settings. SCREEN 1 Water “droplets”... -
Page 8: Machine Control Panel
Machine Control Panel On/Off Key Switch (See figure 1, Item D) E, F The key switch turns “ON” the power to the control panel. “O” is the “OFF” and “I” is the “ON”. Brush Up/Down Switch (See figure 1, Item A) To lower brush head, push the brush switch in the down (+) position. -
Page 9: Machine Controls And Features
Machine Controls and Features Recovery Tank Float The Scrubtec R is equipped with a float that shuts the vacuum off when the recovery tank is full. The squeegee will no longer pick up water. If this should happen, raise the squeegee and empty the recovery tank. The Traverse The Scrubtec R is equipped with an electronically controlled traverse system with variable speeds in... -
Page 10: How To Prepare The Machine For Operation
How To Prepare the Machine For Operation How To Handle the Packed Machine The machine is packed in a specific package provided on a pallet so that it can be moved with a forklift. BATTERY CONNECTIONS WARNING: The packages cannot be placed on top of each other. -
Page 11: Battery Maintenance
How To Prepare the Machine For Operation Battery Maintenance The electrical power to operate the machine comes from the storage batteries. Storage batteries need preventative maintenance. Correct Fill WARNING: Working with batteries can be dangerous. Always wear eye protection and protective clothing when working near batteries. -
Page 12: How To Charge The Batteries
How To Prepare the Machine For Operation How to Charge the Batteries WARNING: Charging the batteries in an area without adequate ventilation could result in an explosion. To prevent an explosion, charge the batteries only in an area with good ventilation. WARNING: Lead acid batteries generate gases which could explode. -
Page 13: Level Indicators For The Charge On The Batteries
How To Prepare the Machine For Operation Level Indicators for the Charge of the Batteries The battery meter ( see figure 7) on the control panel has a digital read out with 10 fixed positions (A) and also a blinking indicator (B). The bars that appear on the display show the approximate charge level with icon (blinking) discharged battery. -
Page 14: How To Change Or Rotate Brushes On Cylindrical Brush Head
How To Prepare the Machine For Operation How To Change or Rotate Brushes on Cylindrical Brush Head To install or rotate brushes on the cylindrical brush head: 1. Raise the brush deck and turn the key switch “OFF”. 2. Raise the brush skirt and pull out to remove. See figure 11. -
Page 15: How To Install And Remove The Brush Or Pad On The Boost Head
How To Prepare the Machine For Operation How To Install The Brush Or Pad on the BOOST machine To install the brush or pad on the BOOST machine, follow this procedure: 1. Turn the key switch "ON". 2. Put the brush switch in the "UP" position. 3. -
Page 16: How To Operate The Machine
How To Operate The Machine How to Return One Touch to Factory Default Settings To restore the factory settings, follow the procedures below: Press and hold the green one touch button (figure 17) until you hear a double beep from the machine. NOTE: The time required for this will be approximately 15 seconds. -
Page 17: How To Read The Battery Meter
How To Operate the Machine SCREEN 1 How to Read the Battery Meter (see figure 21, A) The battery meter is an indicator on the LCD display. This indicator is on the LCD display on the front of the machine. It has 10 bars with 10 bars visible indicating a full charge. -
Page 18: How To Operate The Squeegee And The Vacuum Motor
How To Operate the Machine How to Operate the Squeegee and the Vacuum Motor The squeegee wipes the floor while the vacuum motor removes the dirty solution from the floor. To operate the squeegee, follow this procedure: 1. To lower the squeegee and start the vacuum motor, press the squeegee up/down switch to the down position (figure 24). -
Page 19: How To Fill The Solution Tank
How To Operate the Machine How to Operate the Forward / Reverse Switch (see figure 28). To go forward, push the up arrow side of the switch. To go in reverse, push the down arrow side of the switch. How to Fill the Solution Tank The solution tank fill port is located at the left side of the machine (see figure 29). -
Page 20: Do These Procedures When You Begin Your Work Period
How To Operate the Machine (cont.) To traverse the machine follow this procedure: 1. Sit on the driver seat. NOTE: The machine will not traverse if the operator is not properly seated. 2. Turn the key switch to the “ON” position. 3. -
Page 21: How To Clean A Floor
How To Operate the Machine How to Clean a Floor WARNING: Water solutions or cleaning materials used with this type of machine can leave wet areas on the floor surface. These areas can cause a dangerous condition for the operator or other persons. Always put CAUTION signs near the area you are cleaning. -
Page 22: How To Clean A Very Dirty Floor
How To Operate the Machine How to Clean a Very Dirty Floor To clean a very dirty floor, follow this procedure: Apply solution to the floor. Do not lower the squeegee. This will keep the vacuum motor off. Lower the brush or pad and scrub the floor. Scrub the floor again with additional solution and lower the squeegee. - Page 23 How To Operate the Machine 11. Rinse the tank. Put clean water in the tank through the opening at the top. Be careful not to allow water into the vacuum intake tube (with screen). 12. If the tank or recovery hose has an obstruction, use water pressure to flush them.
-
Page 24: Maintenance
Maintenance Maintenance To Be Done Every Week WARNING: Maintenance and repairs must be done by authorized personnel only. Always empty the solution tank and the recovery tank before doing any maintenance. Keep all fasteners tight. WARNING: Always wear eye protection and protective clothing when working near batteries. -
Page 25: Cleaning The Solution Tank And Filter
Maintenance 5. Clean the hose fitting in the recovery tank and spray water down the squeegee hose to clean out debris. 6. Reattach the squeegee hose. Cleaning the Solution Tank and Filter 1. Move the machine so that the solution tank filter assembly is located directly over a floor drain. -
Page 26: Rear Squeegee Blade Replacement
Maintenance Rear Squeegee Blade Replacement If the rear squeegee blade is worn and does not dry the floor well, follow this procedure: 1. Remove the squeegee assembly from the machine. 2. Remove the squeegee blade and inspect it. 3. Rotate the squeegee blade to obtain a new cleaning edge. -
Page 27: How To Correct Problems In The Machine
HOW TO CORRECT PROBLEMS IN THE MACHINE PROBLEM CAUSE ACTION The solution flow is not set Make sure the solution flow is set. Insufficient water onto the brushes There is no water in the solution tank. Fill the solution tank. The solution filter is dirty. -
Page 28: Common Error Codes
Scrubtec R Common Error Codes ERROR CAUSE ACTION CODE 1500 Make sure manual override is not Check brake and wiring for 1501 short circuit. engaged. 1507 1600 Poor or corroded connection to the High battery voltage. battery. 3100 Probable short circuit of Check the traction, brush and vac motor 3101 connections on the trio and check wiring... -
Page 29: Accesories And Options
11430B Clean Grit Abrasive (2 req.) 11425B Supergrit (2 req.) 11424B Polypropylene (2 req.) 10875A Nylon (2 req.) SCRUBTEC R 571 C Cylindrical Model PART NO. DESCRIPTION 30614A Polypropylene (2 req.) 30615A Nylon (2 req.) 30616A Clean Grit Abrasive (2 req.) 30617A Supergrit (2 req.) - Page 30 NOTES Nilfisk ALTO Page -30- Operator's Manual - SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering...
-
Page 31: Section Ii Parts And Service Manual
Manual Steering Models SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 586... -
Page 32: Final Assembly Drawing 10/06
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ® R R R R R SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST... -
Page 33: Parts List
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ® R R R R R SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST... -
Page 34: Main Frame Assembly Drawing (Rotary) 3/08
Nilfisk ALTO SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 Main Frame Assembly Drawing (Rotary) 3/08 Drawing #11098A 1A, 1B 19A, 19B See Detail A Nilfisk ALTO Page... -
Page 35: Parts List
Nilfisk ALTO SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 Main Frame Assembly Parts List (Rotary) 3/08 Drawing #11098A Part No. Description 53386B Actuator, Head Lift 40910A Potentiometer & Circuit Borad... -
Page 36: Main Frame Assembly Drawing (Cylindrical)
Nilfisk ALTO SCRUBTEC R 571C SCRUBTEC R 571C SCRUBTEC R 571C SCRUBTEC R 571C SCRUBTEC R 571C Main Frame Assembly Drawing 3/08 Drawing #10949S 3A, 3B See Detail A Nilfisk ALTO Page -36- Operator's Manual - SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering... -
Page 37: Parts List
Nilfisk ALTO SCRUBTEC R 571C SCRUBTEC R 571C SCRUBTEC R 571C SCRUBTEC R 571C SCRUBTEC R 571C Main Frame Assembly Parts List 3/08 Drawing #10949S Part No. Description 766780 Pin, Hair 82501A Pin, Clevis 40771A Actuator, Head Lift 40910A Potentiometer & Circuit Borad 40866A Housing Potentiometer 40889A... -
Page 38: Main Frame Assembly Drawing (Boost)
Nilfisk ALTO SCRUBTEC BOOST SCRUBTEC BOOST SCRUBTEC BOOST ® ® ® ® ® R R R R R SCRUBTEC BOOST SCRUBTEC BOOST Main Frame Assembly Drawing 3/08 Drawing #11107A 2A, 2B 12A,12B Nilfisk ALTO Page -38- Operator's Manual - SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering... -
Page 39: Parts List
Nilfisk ALTO SCRUBTEC BOOST SCRUBTEC BOOST SCRUBTEC BOOST ® ® ® ® ® R R R R R SCRUBTEC BOOST SCRUBTEC BOOST Main Frame Assembly Parts List 3/08 Drawing #11107A Part No. Description 766780 Pin, Hair 53874A Actuator, Head Lift 40910A Potentiometer &... -
Page 40: Optional Side Squeegee Lift (28 & 34 Rotary Models)
Nilfisk ALTO SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 Optional Side Squeegee Lift Assembly Drawing 5/05 Nilfisk ALTO Page -40- Operator's Manual - SCRUBTEC R Manual Steering... -
Page 41: Parts List
Nilfisk ALTO SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 Optional Side Squeegee Lift Assembly Parts List 5/05 Part No. Description 87624A Washer, Nylon 1 1/2 x 1/4 x 1/8 86004A Screw, 1/4-20 x 1.50 HHCS... -
Page 42: Front Wheel Assembly Drawing And Parts List 6/07
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ® R R R R R SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST... -
Page 43: Squeegee Lift Assembly Drawing And Parts List 4/06
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ® R R R R R SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST... -
Page 44: Recovery Tank Assembly Drawing 6/07
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... -
Page 45: Parts List
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ® R R R R R SCRUBTEC R 571, 586, 571 C, BOOST... -
Page 46: Solution Tank Assembly Drawing (View 1)
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... -
Page 47: Parts List (View 1)
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... -
Page 48: Solution Tank Assembly Drawing (View 2)
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... -
Page 49: Parts List (View 2)
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... -
Page 50: Steering Column Assembly Drawing 5/07
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ® R R R R R SCRUBTEC R 571, 586, 571 C, BOOST... -
Page 51: Parts List
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ® R R R R R SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST... -
Page 52: 28" Rotary Brush Head Assembly Drawing And Parts List
Nilfisk ALTO SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 SCRUBTEC R 571 571 Rotary Brush Head Assembly Drawing and Parts List 3/08 Drawing #10697A 1, 1A, 1B, 1C Part No. Description Part No. Description 980638... -
Page 53: 34" Rotary Brush Head Assembly Drawing And Parts List
Nilfisk ALTO SCRUBTEC R 586 SCRUBTEC R 586 SCRUBTEC R 586 SCRUBTEC R 586 SCRUBTEC R 586 586 Rotary Head Assembly Drawing and Parts List 3/08 Drawing #10698A 1, 1A, 1B, 1C 2 Part No. Description Part No. Description 40905B Motor, Dual Gear Box 782002 Clamp, Manifold... -
Page 54: 28" Cylindrical Head Assembly Drawing
Nilfisk ALTO SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C 571 Cylindrical Head Assembly Drawing 5/05 Drawing #10962A Nilfisk ALTO Page -54- Operator's Manual - SCRUBTEC R Manual Steering... -
Page 55: Parts List
Nilfisk ALTO SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C SCRUBTEC R 571 C 571 Cylindrical Head Assembly Parts List 3/05 Drawing #10962A Ref Part No. Description 980638 Washer, 3/8 Lock 962244 Bolt, 3/8-16 x .75 Hex... -
Page 56: 32" Boost Head Assembly Drawing
Nilfisk ALTO SCRUBTEC BOOST SCRUBTEC BOOST ® ® ® ® ® R R R R R SCRUBTEC BOOST SCRUBTEC BOOST SCRUBTEC BOOST ® BOOST Head Assembly Drawing 10/06 Drawing #11103A Nilfisk ALTO Page -56- Operator's Manual - SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering... -
Page 57: Parts List
Nilfisk ALTO SCRUBTEC BOOST SCRUBTEC BOOST ® ® ® ® ® R R R R R SCRUBTEC BOOST SCRUBTEC BOOST SCRUBTEC BOOST ® BOOST Head Assembly Drawing 6/07 Drawing #11103A Ref Part No. Description 53493A Pin, Quick Release Actuator 40790B Motor, 24V DC 30735A Spacer, Lift Arm... -
Page 58: Squeegee Assembly Drawing 3/08
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... -
Page 59: Parts List
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... -
Page 60: Front Squeegee Assembly Drawing And Parts List 8/05
Nilfisk ALTO SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 Front Squeegee Assembly Drawing and Parts List 8/05 (Rotary Machines Only) Drawing # 10694A Part No. Description 80275A... -
Page 61: Front Squeegee Arm Assembly Drawing And Parts List 5/05
Nilfisk ALTO SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 SCRUBTEC R 571, 586 Front Squeegee Arm Assembly Drawing and Parts List 5/05 (Rotary Machine Only) Drawing # 10694A Part No. Description... -
Page 62: Electrical Panel Assembly Drawing And Parts List 3/08
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... -
Page 63: Electrical Connection Diagram 9/06
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®... - Page 64 Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®...
- Page 65 Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®...
- Page 66 Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®...
-
Page 67: Electrical Schematic 3/08
Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ® R R R R R SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST... - Page 68 Nilfisk ALTO SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST SCRUBTEC R 571, 586, 571 C, BOOST ® ® ® ® ®...
- Page 69 NOTES Nilfisk ALTO Operator's Manual - SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering SCRUBTEC R Manual Steering Page -69-...
- Page 70 Tel.: (+84) 4 761 5642 Fax: (+35) 121 911 2679 Fax: (+32) 02 466 61 50 Fax: (+31) 36 5460 761 Fax: (+84) 4 761 5643 E-mail: mkt@nilfisk-advance.es E-mail: info.be@nilfisk-alto.com E-mail: info @nilfisk-alto.nl E-mail: nilfisk@vnn.vn www.nilfisk-alto.com www.nilfisk-alto.nl AUSTRIA RUSSIA Nilfisk-Advance GmbH...
Need help?
Do you have a question about the SCRUBTEC R 571 and is the answer not in the manual?
Questions and answers