Sony MSU-1000 Operation Manual page 46

Paint menu
Menu Submenu
Flicker Reduction
Gamma/Knee
Low Key Saturation
Knee Saturation
Gamma Table
Standard
Hyper
Special
User
Cross Color Suppression
46
Menus
Switch Control item
ON
Power Line
Frequency
Area
Average Time
Gain
Offset
Gamma OFF
Gamma
Black Gamma ON
Blk Gamma
Knee OFF
Knee Point
Knee Slope
Auto Knee ON
ON
Range
Low Key Sat
ON
Knee Sat
Standard
Standard
Gamma OFF
Hyper
Hyper
Gamma OFF
Special
Special
Gamma OFF
User
User
Gamma OFF
ON
CCS Level
Description
This function is for super motion. It allows you to reduce flickering on the
screen caused by the relationship between temporal fluctuations of the
light source and the frame frequency of the camera.
Enables the Flicker Reduction function.
Sets the power line frequency of the lighting.
When there are multiple light sources, the screen is divided into areas and
flickering is reduced in each area. This sets that area division method.
Sets the time constant of the parameter used for correction.
This is the correction level.
This is image level at which correction starts to be applied.
This page contains the gamma, black gamma, and knee.
Disables gamma correction.
This value corresponds to the master of gamma adjustment.
Enables the black gamma function.
This value corresponds to the master of black gamma adjustment.
Disables knee correction. Auto Knee is also disabled.
This value corresponds to the master of knee point adjustment.
This value corresponds to the master of knee slope adjustment.
Enables the auto knee function.
Allows adjustment of the saturation of dark sections.
Enables the low key saturation function.
Sets the range for which low key saturation is performed.
Sets the saturation level.
Compensates for the color fading of the parts for which knee is applied and
makes them appear colorful.
Enables the knee saturation function.
Sets the correction level.
Allows you to select the curve for gamma correction.
Uses a standard gamma curve.
Allows you to select a type of standard gamma curve.
Disables gamma correction.
Uses gamma to completely reproduce the dynamic range of the camera
including the high-luminance parts.
Allows you to select a type of hyper gamma curve.
Disables gamma correction.
Allows you to select the gamma that emulates film and other gamma.
Allows you to select a type of special gamma curve.
Disables gamma correction.
Allows you to select gamma created with CVP File Editor and other
gamma.
Allows you to select a type of user gamma curve.
Disables gamma correction.
Reduces the cross color of VBS. This can only be used when an SD
camera is connected.
Enables the Cross Color Suppression function.
Sets the control level.