Table of Contents
Advertisement
a AUTO SETUP buttons and START/BREAK button
Pressing one of the following buttons and then pressing the
START/BREAK button runs the corresponding automatic
adjustment function.
SKIN DTL AUTO HUE (skin detail auto hue): Automatically
sets the skin detail to an effective hue.
LEVEL (level): Runs the auto level setup.
Pressing the START/BREAK button while this function is
running stops auto adjustment. The button flashes to indicate
that this function is stopped, and pressing the button again
stops the flashing indication.
b WHITE (auto white balance) button
This button is for starting auto white balance adjustment. The
button is lit while this function is running and goes out when
adjustment is finished. Pressing it again or pressing the
START/BREAK button while this function is running stops
automatic adjustment. The button flashes to indicate that this
function is stopped, and pressing the button again stops the
flashing indication.
c BLACK (auto black balance) button
This button is for starting auto black balance adjustment. The
button is lit while this function is running and goes out when
adjustment is finished. Pressing it again or pressing the
START/BREAK button while this function is running stops
automatic adjustment. The button flashes to indicate that this
function is stopped, and pressing the button again stops the
flashing indication.
3 Camera/CCU function ON/OFF buttons
These buttons are for various functions. A function is enabled
when its button is lit. A function with an OFF indication is off
when the button is lit. Functions can be assigned to the spare
buttons (assignable buttons).
For details on assigning functions to assignable buttons, see
“To assign functions to assignable buttons” on page 31.
MSU-1000
In the case of MSU-1000, the following switch functions are
assigned to 19 buttons and 9 buttons are spare by default.
Button
Description
KNEE OFF
Knee compensation function
DETAIL OFF
Detail function for performing contour
correction
WHITE CLIP OFF
White clip function
GAMMA OFF
Gamma function
CHROMA OFF
Chroma function
MATRIX OFF
Linear matrix function
SD MATRIX OFF
SD matrix function
SD DETAIL OFF
SD detail function
KNEE APT
Knee aperture function
KNEE SAT
Knee saturation function
AUTO KNEE
Auto knee function
Button
Description
LOW KEY SAT
Low key saturation function
MONO COLOR
Mono color function
5600K
Electric color temperature correction
function
SKIN DETAIL
Skin detail function
GATE
Gate function
Displays the active area of the
function on the screen (corresponds
to Skin DTL and Multi matrix gate).
For details on for what kind of image
output a gate signal is displayed, refer
to the operation manual of the device
of the connection destination.
SATURATION
Saturation function
BLACK GAMMA
Black gamma function
CHARACTER
Display CNU or CCU characters.
(CNU characters by default. You can
change to CCU via function
assignment settings.)
When set to CCU characters, this
turns ON/OFF CCU character display
or switches to the next page. When
this function is ON, each press of the
button switches to the next page (a
long press switches to the last page
and stops the function in the OFF
state).
When set to CNU characters, this
turns ON/OFF CNU character display.
For details on for what kind of image
output characters are displayed, refer
to the operation manual of the device
of the connection destination.
MSU-1500
In the case of MSU-1500, the following switch functions are
assigned to 8 buttons and 3 buttons are spare by default.
Button
Description
KNEE OFF
Knee compensation function
DETAIL OFF
Detail function
5600K
Electric color temperature correction
function
SKIN DETAIL
Skin detail function
GATE
Gate function
Displays the active area of the
function on the screen (corresponds
to Skin DTL and Multi matrix gate).
For details on for what kind of image
output a gate signal is displayed, refer
to the operation manual of the device
of the connection destination.
SATURATION
Saturation function
Page 11
Names and Functions of Parts
Hide quick links:
Advertisement
Table of Contents
