Page 1
XR 330 SPOT PR-2350 This product manual contains important information about the safe installation and use of this projector. Please read and follow these instructions carefully and keep this manual in a safe place for future reference. PR LIGHTING LTD.
INDEX SAFE USAGE OF THE PROJECTOR INSTALLING THE PROJECTOR FITTING THE LAMP POWER SUPPLY – MAINS CONTROL CONNECTIONS DMX TERMINATOR SETUP OPTIONS-PROJECTOR CONFIGURATION TO SET THE DMX START ADDRESS STAND-ALONE MODE MASTER/SLAVE MODES OPERATION MENU ERROR MESSAGE REPLACING GOBOS DMX PROTOCOL MAINTENANCE LUBRICATION KEEPING THE PROJECTOR CLEAN...
SAFE USAGE OF THE PROJECTOR When unpacking and before disposing of the carton check there is no transportation damage before using the projector. Should there be any damage caused by transportation, consult your dealer and do not use the apparatus. The projector is for indoor use only, IP20.
To pass the SAFETY CORD through the HOLES for safety! Always ensure that the projector is firmly anchored to avoid vibration and slipping whilst functioning. Always ensure that the structure that you are going to mount the projector to is secure and strong enough to support the weight of a XR 330 Spot WARNING: 1.
Note: care should be taken to ensure that none of the pins touch the metallic body of the plug or each other. XLR plugs and sockets mustn’t be connected in any way other than mentioned in the above figure. The XR 330 Spot accepts digital control signals in protocol DMX512 (1990).
TO SET THE DMX START ADDRESS Each XR 330 Spot must be given a DMX start address so that the correct projector responds to the correct control signals. This DMX start address is the channel number from which the projector starts to “listen” to the digital control information being sent out from the controller.
STAND-ALONE MODE Operate the projector without connecting a controller, enable the master mode in the operation panel, the projector will run in Stand-Alone mode automatically. MASTER/SLAVE MODE Without using a controller, many projectors can run synchronously in the Master/Slave mode by linking them with each other.
Page 8
Color Positions STEPPED Color Positions Color Positions LINEAR F-Gobo Positions STEPPED F-Gobo Positions F-Gobo Positions LINEAR Pan DMX Invert Pan DMX Invert Pan DMX Invert Tilt DMX Invert Tilt DMX Invert Tilt DMX Invert Pan Tilt Swap Pan Tilt Swap Pan Tilt Swap Option Settings Dimmer Invert...
Page 10
Turn Lamp Off Wireless Mode XLR First Wireless Mode XLR Only Wireless Mode Wireless Mode Wireless To XLR Wireless Mode Wireless Options XLR Only Wireless Mode Wireless First Un-Link Wireless Really Un-Link Enter=Yes Operation Mode= DMX Operation Select Memory User Memory 1 Select Memory User Memory 2 Operation Mode=...
Page 11
R Gobo Rotate L R Gobo Rotate L R prism In out R prism In out R Prism Wheel R Prism Rotate Frost Frost Focus Focus Zoom Zoom Pan Coarse Pan Coarse Pan Fine Pan Fine Tilt Coarse Tilt Coarse Tilt Fine Tilt Fine M-Speed...
Iris Iris Fixed Gobo Fixed Gobo R Gobo Wheel R Gobo Wheel R Gobo Rotate R Gobo Rotate R Prism Wheel R Prism Wheel R Prism Wheel R Prism Rotate Focus Focus Zoom Zoom Pan Coarse Pan Coarse Pan Fine Pan Fine Tilt Coarse Tilt Coarse...
Over Temp Error Temp Sense Error Head Fan 1 Fail Lamp Fan error Head Fan 2 Fail Head Fan1 error Head Fan 3 Fail Head Fan2 error Head Fan 4 Fail CYM Fan error Head Fan 5 Fail Fixed gobo wheel fan error Pan Encoder Err Tilt Encoder Err Pan Enc T Out...
Page 14
Short Standard Extended FUNCTION DESCRIPTION mode mode Mode Close 000-010 Open 011-025 Strobe speed from slow to fast 026-225 Strobe Macro 1 226-239 Macro 2 240-241 Macro 3 242-246 Open 247-255 000-003 Close Dimming Linear dimming (0-100%) 004-255 Dimming Fine 000-255 Dimmer in 16 bit White...
Tilt Fine 000-255 Tilt in 16 bit precision Pan & Tilt Speeds Pan & Tilt Speed from Fast to Slow 000-255 Reserved 000-047 Reset 048-080 Reserved 081-112 113-144 Lamp Off ( Delay for 3 s) Control Reserved 145-168 169-200 Lamp Half Power 201-223 Reserved Lamp Full Power...
TECHNICAL DATA VOLTAGES: 100V~240V AC,50/60Hz POWER CONSUMPTION: 450W@220V LAMP: OSRAM SIRIUS HRI 330W XL Colour Temperature 7500K 1500hours Manufacturers Rated Lamp Life COLOURS: CMY linear color mixing system with Marco 1 Color Wheel with 14 colors plus white With variable speed bi-directional rainbow effect Optional Stepping/linear color changing FIXED GOBO WHEEL: 1 Fixed gobo wheel : 17gobos+ White...
Page 19
DIMMER: 0-100% linearly adjustable SHUTTER: Double shutter blades, 0.3~25 F.P.S HEAD MOVEMENT: Pan 540º, Tilt 270º with auto position correction BEAM ANGLE: Zoom: 3.8°-42°, linearly adjustable CONTROL: DMX512, 3 pin and 5 pin interfaces 20 channels in short mode, 2 5 channels in standard mode and 3 1 channels in extended mode Self-test mode OTHER FUNCTIONS: Adjustable Pan &...
Page 22
omponent Order Code NAME PART NO. QUANTITY REMARK Pan Motor 030040233 Tilt Motor 030040233 Dimmer/Strobe Motor 030040213 CYM Motor 030040228 Rotating Gobo Wheel Motor 030040231 Fixed Gobo Wheel Motor 030040221 030040221 Color Wheel Motor Iris Motor 030040230 Rotator Motor 030040221 FOCUS MOTOR 030040232 030040221...