Emerson CF717BS00 Owner's Manual page 16

11. Installation of Light Kit Assembly
11.4
Position the fan speed control switch pull chain through the
NOTE: Be sure that the fan switch chain does not
side hole of the light kit fitter plate (Figure 26).
make contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch chain
from touching the light bulbs.
11.5
Position the light switch pull chain through the center hole
of the glass shade.
Position the speed control switch pull chain through the
NOTE: Be sure that the fan switch chain does not
center hole of the glass shade.
make contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch chain
from touching the light bulbs.
Place the glass shade onto the light kit assembly threaded
nipple (Figure 27).
11.6
Pass the light pull chain through the center bushing in the
bowl cap.
Pass the speed control switch pull chain through the offset
hole of the bowl cap.
Place the bowl cap on the threaded nipple and against the
glass shade (Figure 28).
Install finial nut finger tight to secure the bowl cap to the
glass shade (Figure 28).
Figure 26
GLASS
SHADE
THREADED NIPPLE
Figure 27
GLASS
SHADE
BOWL CAP
FINIAL NUT
Figure 28
16
(continued)
LIGHT KIT
FITTER PLATE
SPEED CONTROL
PULL CHAIN
SPEED
CONTROL
PULL CHAIN
LIGHT SWITCH
PULL CHAIN
ETL Model No.: CF717