Running The Program - Microchip Technology Explorer 16 User Manual

Explorer 16 Development Board User's Guide Addendum for PIC32MX
1.10

RUNNING THE PROGRAM

Connect the Explorer 16 Development Board to the PC with a DB-9 serial cable. Open
a HyperTerminal session on the PC using the settings shown in Figure 1-10.
FIGURE 1-10:
From the menu bar of the MPLAB IDE window, select Debugger > Run to execute the
program. Or select the Debug window and click the Run button (Figure 1-11) to execute
the program.
FIGURE 1-11:
Confirm that the HyperTerminal window displays the messages and prompts that you
expect, as in Figure 1-12.
DS61147A-page 10
PC HYPERTERMINAL PORT SETTINGS
RUN THE PROGRAM
© 2008 Microchip Technology Inc.