Voip Settings; Qos Settings - Panasonic KX-NT700 Operating Instructions Manual

VoIP Settings

Setting and Description
Preferred Codec
Determines the preferred codec for IP calls.
RTP Packet Size
Determines the size of outgoing RTP packets.
SIP Signalling Port Number
Determines the port number used for SIP signalling.
Note
•
It is necessary to restart the unit after changing this
setting (see Page 59).
RTP Port Number (Min.)
Determines the lowest port number used for RTP.
Notice
•
Set this parameter to a value lesser than the setting
for [RTP Port Number (Max.)].
RTP Port Number (Max.)
Determines the highest port number used for RTP.
Notice
•
Set this parameter to a value greater than the
setting for [RTP Port Number (Min.)].

QoS Settings

Notice
•
It is necessary to restart the unit after changing these settings (see Page 59).
Setting and Description
VLAN ID
Determines the VLAN ID.
SIP ToS Field
Determines the value of the SIP ToS Field.
RTP ToS Field
Determines the value of the RTP ToS Field.
VLAN Priority
Determines the VLAN priority.
Document Version 2010/02
Available Settings
G.722
G.711μ-law
G.711A-law
G.729a
20 ms
30 ms
40 ms
50 ms
60 ms
1024–50999
51000–51998
(even values only)
51002–52000
(even values only)
Available Settings
1–4095
8-bit binary code
8-bit binary code
0–7
Operating Instructions for Conferencing Phone Manager
Programming the Unit
Default Setting
G.722
20 ms
5060
51000
52000
Default Setting
4095
00000000
00000000
0
65