Function Buttons And Function Button Icons - Panasonic KX-NT700 Operating Instructions Manual

Function Buttons and Function Button Icons

By pressing a function button ([F1], [F2], and [F3]) you can select the function displayed directly above it.
In this document, function buttons ([F1], [F2], and [F3]) are
referred to by their corresponding icons.
In the example shown here,
"Press ",
PLAY
"Press ", or
TEL
"Press "
would indicate pressing [F1], [F2], and [F3], respectively.
Function Button Icons
Operation
Line Selection
Starting and
Ending Calls
Phonebook
Document Version 2010/02
Icon
Used to select the TEL line.
TEL
Only displayed when the "Line Selection" setting is set to "IP + TEL".
Used to select the IP line.
IP
Used to select the PS line.
PS
Only displayed when the "Line Selection" setting is set to "IP + PS".
Used to select the PC line.
PC
Only displayed when the "Line Selection" setting is set to "IP + PC".
Used to change the "Line Selection" setting.
LINE
Used to answer an incoming call.
ANSWER
Used to reject an incoming call.
REJECT
Used to make a call.
Used to end the current call.
END
Used to establish a conference call.
CONF
Used to slow down the other party's speech while on a call.
SPEED
Used to open the phonebook.
Used to add an entry to the phonebook.
ADD
Used to edit a phonebook entry.
EDIT
Used to switch between alphabet entry mode and extended entry mode.
CHAR
Used to move the cursor to the left.
Used to move the cursor to the right.
Used to erase an entry in the phonebook.
ERASE
Description
Operating Instructions for Conferencing Phone Manager
CPM Screens
29