Voip Settings - Panasonic KX-NT700 Operating Instructions Manual

Programming the Unit

VoIP Settings

Preferred CODEC
Description
Determines the preferred codec for IP calls.
RTP Packet Size
Description
Determines the size of outgoing RTP packets.
SIP Signaling Port Number
Description
Determines the port number used for SIP signaling.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see page 43).
RTP Port Number (Minimum)
Description
Determines the lowest port number used for RTP.
•
Set this parameter to a value lesser than the setting
for "RTP Port Number (Maximum)".
RTP Port Number (Maximum)
Description
Determines the highest port number used for RTP.
•
Set this parameter to a value greater than the setting
for "RTP Port Number (Minimum)".
52 Operating Instructions
Available Settings
G.722
G.711μ-law
G.711A-law
G.729a
Available Settings
20 ms
30 ms
40 ms
50 ms
60 ms
Available Settings
5060–5070
Available Settings
51000–51998
(even values only)
Available Settings
51002–52000
(even values only)
Default Setting
G.722
Default Setting
20 ms
Default Setting
5060
Default Setting
51000
Default Setting
52000
Document Version 2008/10