Gv-Mdr Series - GeoVision GV-BX120D User Manual

6.4.2 GV-MDR Series

1. Paste the installation sticker on the desired location. The arrow should
point toward the direction that the camera faces.
2. Drill one hole on each of the two curves for screw anchors. Drill the
circle (30 mm in diameter) if you want to run the cable into the ceiling.
3. Insert the screw anchors.
4. Unscrew the housing cover using the supplied torx wrench.
5. Secure the camera body to the ceiling with the self-tapping screws.
Figure 6-9
64
30 mm
Figure 6-8
Drill a hole
on each