5.6 Notice for Using the IR Arctic Box Camera
Ensure that you:
• enable IR LED function on the Web interface after loading the default
settings.
• disable the status LED to reduce reflection when a green light spot
appears on the live view.
5.6.1 Enabling IR LED after Loading Default
Each GV-IR Arctic Box Camera is equipped with 4 IR LEDs to provide
infrared illumination at night. The factory-loaded setting for the IR LED
function is enabled. If you have restored the camera to default settings,
please follow the steps below to enable the IR LED function.
1.
In the left menu of Web interface, select Video Settings and then
Streaming 1.
2.
Enable Trigger IR by D/N in IR Check Function.
3.
Click Apply.
46
Figure 5-12