Set Up A Dynamic Dns Service Account - TP-Link Archer C2600 User Manual

Chapter 11
¾ To reserve an IP address for a specified client device:
1. Click the Add button.
2. Click View Exsiting Devices
3. Enter the IP address
4. Enter the Description
5. Select the Enable This Entry
6. Click OK.
The IP address reservation is configured successfully, and you can see the rule shown
as below.

11. 4. Set Up a Dynamic DNS Service Account

Most ISPs (Internet service provieders) assign a dynamic IP address to the router and
you can use this IP address to access your router remotely. However, the IP address can
change any time and you don't know when it changes. In this case, you might need
the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your
friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in
no need of checking and remembering the IP address.
Note:
DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
or enter the MAC address
to set to the client device.
for the rule.
checkbox.
Customize Your Network Settings
of the client device.
70