Position Your Router; Connect Your Router - TP-Link Archer C2600 User Manual
Wireless dual band gigabit router
Hide thumbs
Also See for Archer C2600:
- User manual (113 pages) ,
- Quick installation manual (2 pages) ,
- User manual (89 pages)
Table of Contents
Advertisement
Chapter 2
2. 1.
Position Your Router
• The Product should not be located where it will be exposed to moisture or excessive
heat.
• Place the router in a location where it can be connected to the various devices as well
as to a power source.
• Make sure the cables and power cord are safely placed out of the way so they do not
create a tripping hazard.
• The router can be placed on a shelf or desktop.
• Keep away from the strong electromagnetic radiation and the device of
electromagnetic sensitive.
2. 2.
Connect Your Router
Follow the steps below to connect your router.
1. If your Internet connection is through an Ethernet cable from the wall instead of
through a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the
router's Internet port, then follow steps 5 and 6 to complete the hardware connection.
1 ) Install the antennas and position them vertically for best signal reception.
2 ) Turn off the modem, and remove the backup battery if it has one.
Connect the Hardware
10
Advertisement
Table of Contents
