Create Static Routes - TP-Link Archer C2600 User Manual

Chapter 11
To set up DDNS, please follow the instructions below:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced > Network
3. Select the DDNS service provider
account, select a service provider and click
4. Enter the username, password and domain name of the account (such as lisadns.
ddns.net).
5. Click Login and Save.
Tips:
If you want to use a new DDNS account, please

11. 5. Create Static Routes

Static routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.
I want to:
> Dynamic DNS.
(NO-IP or Dyndns). If you don't have a DDNS
Logout first, then login with the new account.
Visit multiple networks and multiple servers at the same time.
For example, in a small office, my PC can surf the Internet, but I
also want to visit my company's network. Now I have a switch and
another router. I connect the devices as shown in the following
figure so that the physical connection between my PC and my
company's server is achieved. To surf the Internet and visit my
company's network at the same time, I need to configure the
static routing.
Customize Your Network Settings
Go to register.
71