Set Up A Dynamic Dns Service Account - TP-Link Archer C6 User Manual

Chapter 12
1. Tick the Enable checkbox.
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The
and is the same as the LAN IP address of the router.
4. Click SAVE.
• To reserve an IP address for a specified client device:
1. Click Add in the Address Reservation
2. Click VIEW CONNECTED DEVICES
IP for. Then the MAC Address
of the client device manually.
3. Enter the IP address
4. Click SAVE.
12 4

Set Up a Dynamic DNS Service Account

Most ISPs assign a dynamic IP address to the router and you can use this IP address
to access your router remotely. However, the IP address can change from time to time
and you don't know when it changes. In this case, you might apply the DDNS (Dynamic
section.
and select the you device you want to reserve an
will be automatically filled in. Or enter the
to reserve for the client device.
Customize Your Network Settings
IP Address Pool.
Default Gateway is automatically filled in
MAC address
56