Specify Dhcp Server Settings - TP-Link Archer C2600 User Manual
Wireless dual band gigabit router
Hide thumbs
Also See for Archer C2600:
- User manual (113 pages) ,
- Quick installation manual (2 pages) ,
- User manual (89 pages)
Table of Contents
Advertisement
Chapter 11
11. 3. Specify DHCP Server Settings
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary, and
you can reserve LAN IP address for specified client device.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Advanced
>
Network
¾ To specify the IP address that the router assigns:
1. Make sure that the
2. Enter the starting and ending IP address in the
3. Enter other parameters if the ISP offers, the Default Gateway is automatically filled
the same as the LAN IP address of the router.
4. Click
Save
to make the settings effective.
>
DHCP
Server.
Enable DHCP Server
Customize Your Network Settings
checkbox is selected.
IP Address
Pool.
69
Advertisement
Table of Contents
