TP-Link Archer C2600 User Manual page 104

5 ) Click Save.
6 ) Power cycle the modem and the TP-LINK router again.
3. Please refer to 12. 3. Upgrade the Firmware
4. Check the TCP/IP settings on the particular device if all other devices can get
Internet from the router.
If you've tried every method above but cannot access the Internet, please contact the
technical support.
Q6. I cannot find my wireless network or I cannot connect the wireless
network, what can I do?
If you fail to find any wireless network, please follow the steps below:
1. Make sure the wireless function is enabled if you're using a laptop with built-in wireless
adapter. You can refer to the relevant document or contact the laptop manufacturer.
2. Make sure the wireless adapter driver is installed successfully and the wireless
adapter is enabled.
• On Windows 7
1 ) If you see the message
wireless function is disabled or blocked somehow;
2 ) Clicking on
itself.
• On Windows XP
1 ) If you see the message
is usually because windows configuration utility is disabled or you are running
another wireless configuration tool to connect the wireless;
2 ) Exit the wireless configuration tool( the TP-LINK Utility, for example);
3 ) Select and right click on
Computer Management window;
No connections are
Troubleshoot and windows might be able to fix the problem by
Windows cannot configure this wireless
My Computer
to upgrade the firmware of the router.
available, it is usually because the
on desktop, select
connection, this
Manage to open
100