TP-Link Archer C2600 User Manual page 79
Wireless dual band gigabit router
Hide thumbs
Also See for Archer C2600:
- User manual (113 pages) ,
- Quick installation manual (2 pages) ,
- User manual (89 pages)
Table of Contents
Advertisement
Chapter 11
¾ To change the security option:
1. Go to
Advanced
>
Wireless >Wireless
2. Select the wireless network
3. Select an option from the
options, No Security, WPA/WPA2 - Personal (Recommended), WPA/WPA2 - Enterprise
and WEP. We recommend you don't change the default settings unless necessary.
If you select other options, configure the related parameters according to the help
page.
In addition
•
Mode
- Select a transmission mode according to your wireless client devices.
802.11b/g/n
mixed,
mixed,
802.11n/ac mixed
it as default.
•
Channel Width
- Select a channel width (bandwidth) for the wireless network.
•
Channel
- Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.
•
Transmit Power
- Select either High,
The default and recommended setting is High.
Settings.
2.4GHz
or 5GHz.
Security
dropdown list. The router provides four security
802.11g/n mixed
or
or
802.11ac only
Middle
Customize Your Network Settings
802.11n only
for 2.4GHz; and
for 5GHz. It is recommended to just leave
or
Low
to specify the data transmit power.
802.11a/n/ac
75
Advertisement
Table of Contents
