Table of Contents
Advertisement
Chapter 7
7 4
Set Up a Dynamic DNS Service Account
Most ISPs (Internet service providers) assign a dynamic IP address to the router and
you can use this IP address to access your router remotely. However, the IP address
can change any time and you don't know when it changes. In this case, you might need
the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your
friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in
no need of checking and remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
To set up DDNS, please follow the instructions below:
1
Visit
http://tplinkmodem.net
set for the GPON router.
2
Go to
Advanced
3
Select the
Service Provider
4
Log in with your DDNS account, select a service provider. Enter the username,
password and domain name of the account (such as lisa.ddns.net).
5
Click
Log in
and Save.
Tips: If you want to use a new DDNS account, please log out first, then log in with the new account.
7 5
Create Static Routes
A static route is a pre-determined path that network information must travel to reach
a specific host or network. Data from one point to another will always follow the same
path regardless of other considerations. Normal internet usage does not require this
setting to be configured.
I want to:
or http://192.168.1.1, and log in with the password you
>
Network
>
Dynamic
(TP-Link/Dyndns/NO-IP).
Visit multiple networks and multiple servers at the same time.
For
example, in a small office, my PC can surf the internet
Customize Your Network Settings
DNS.
67
Advertisement
Table of Contents
