Quick Setup - TP-Link Archer C2600 User Manual
Wireless dual band gigabit router
Hide thumbs
Also See for Archer C2600:
- User manual (113 pages) ,
- Quick installation manual (2 pages) ,
- User manual (89 pages)
Table of Contents
Advertisement
Chapter 4
4. 1.
Quick Setup
The Quick Setup Wizard will guide you through the process to set up your router to
access the Internet.
Tips:
If you need the IPv6 Internet connection, please refer to the section of
Follow the steps below to set up your router to access the Internet.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Quick Setup
on the top of the page.
3. Select your Region and Time Zone from the drop-down list and click Next.
Note:
Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region only.
4. Click
Auto Detect
and the router will detect your connection type automatically.
Note:
You can also choose the connection type manually. If you use DSL line and you are only provided an account name
and a password by your ISP, choose PPPoE. If you use cable TV or fiber cable, choose Dynamic IP. If you are provided
more information such as IP address, Subnet Mask and Default Gateway, choose Static IP. Contact your ISP if you are
not sure about the Internet connection information.
Set Up Internet Connections
4. 3. Setting Up an IPv6 Internet
Connection.
16
Advertisement
Table of Contents
