Manually Configure Your Internet Connection Settings - TP-Link Archer C2600 User Manual

Chapter 4
10. Now your computer and WiFi device can connect to the Internet!
Tips:
You can connect your computer to the router's LAN port using an Ethernet cable to join the local area network. You
can also find and select the wireless network name on your WiFi device to join the WiFi network.
4. 2. Manually Configure Your Internet Connection
Settings
In this part, you can check your current Internet connection settings. You can also
modify the settings according to the service information provided by your ISP.
Follow the steps below to check or modify your Internet connection settings.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Basic > Internet
3. Select your Internet connection type from the drop-down list.
Note:
If you are unsure what your connection type is, click
cables and connection information, you can also refer to the demonstrations in Step 4 to judge your connection
type.
4. Follow the instructions on the page to continue the configuration. Parameters on the
figures are just used for demonstration.
1 ) If you choose
Dynamic IP users are usually equipped with cable TV or fiber cable.
on the left to enter the setting page.
Auto
Dynamic IP, you need to select whether to clone the MAC address.
Set Up Internet Connections
Detect. Since different connection types need different
19