Table of Contents
Advertisement
BATTERY MEMORY SET AND CALL OUT
Synchronous Mode
Function: When charging two same batteries, both charging channels can be set by channel one.
ON/OFF Process:
P R O G R A M S E L E C T
S Y S T E M S E T U P - >
S y n c h r o n E n a b l e ?
O N / O F F
Press START, ON/OFF will blink, Then press INC\DEC to choose ON or OFF, Press START again to
confirm.
Press STOP to exit program setting, Press INC\DEC to choose the battery type, both channels will be
charging at the same time with same charging info.
Caution:
1.
When channel two is on charging/discharging, voltage/resistance checking, system setting and
memory mode, the synchronous can't be on. At this time, it only needs to return channel two to
main interface.
2.
When synchronous is on, channel two can't be operated.
3.
When synchronous is on, if channel one checking battery failed, both channels will stop charging.
BATTERY MEMORY SET AND CALL OUT
The charger can store up to 10 different charge/discharge profiles in each channel for your
convenience, and the stored profiles can be recalled quickly without having to go through the setup
process.
When you are willing to alter the parameter value in the program, press START/ENTER to make it
blink then change the value with INC or DEC. The value will be stored by pressing START/ENTER
once.
Note: All following screen are taking 2S(7.4V) LiPo battery for example.
[ B A T T M E M O R Y 1 ]
E N T E R S E T - >
START/ENTER
B A T T T Y P E
L i P o
DEC INC
B A T T V O L T S
7 . 4 V ( 2 S )
DEC INC
Ultimate Duo 1400W
Press INC\DEC to choose
Press START to enter the System Setting,
then press INC\DEC to choose
1. Battery Memory Set
Enter the battery memory program.
(10 different charge/discharge profiles can be stored).
Set the battery type(LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb).
Set the voltage and number of cells(1S-8S).
15 ·
Advertisement
Table of Contents
