Table of Contents
Advertisement
OPERATING PROGRAM
8. Program Stop
During the charging process, press STOP to stop the charging process.
9. Program Complete
When the charging process finishes, an audible sound will be heard.
Charging Program
Depends on different battery type, the operation programs are different.
Batt
Operation
Type
Program
CHARGE
DISCHARGE
STORAGE
LiPo
FAST CHG
Lilon
LiFe
LiHV
BAL CHARGE
MICRO CHARGE
MICRO STORAGE
CHARGE
AUTO CHG
NiMH
DISCHARGE
NiCd
RE-PEAK
CYCLE
CHARGE
Pb
DISCHARGE
· 14
This charging mode is for charging LiPo/LiFe/LiIon/LiHV battery in normal mode.
This mode is for discharging LiPo/LiFe/LiIon/LiHV battery.
This program is for charging or discharging LiPo/LiFe/LiIon/LiHV
battery which will not be used for long time.
The charging capacity may be a bit smaller than normal charging but
the process time will be reduced.
This mode is for balancing the voltage of LiPo/LiFe/LiIon/LiHV battery
cells while charging.
This mode is for balancing the voltage of LiPo/LiFe/LiIon/LiHV battery
cells while charging with balance port.
This program is for charging or discharging LiPo/LiFe/LiIon/LiHV which
will not be used for long time with balance port.
The charger will charge NiMH and NiCd batteries using the charge
current set by the user.
In this program the charger detects the condition of the battery which
is connected to the output and automatically charges the battery.
Note: you should set up the upper limit of the charge current to
avoid damage by excessive feeding current. Some batteries of
low resistance and capacity can lead to higher current.
This mode is for discharging NiMH/NiCd battery.
In re-peak charge mode, the charger can peak charge the battery
once, twice or three times in a row automatically. This is good for
confirming the battery is fully charged, and for checking how well the
battery receives fast charges.
1 to 5 cyclic and continuous process of charge>discharge or
discharge>charge is operable for battery refreshing and balancing to
stimulate the battery's activity.
This mode is for charging Pb battery.
This mode is for discharging Pb battery.
Description
Ultimate Duo 1400W
Advertisement
Table of Contents
