Bluetooth Audio; Aux In Operation - Sandstrom SBTD3012 Instruction Manual

Bluetooth Audio

The unit has a bluetooth function that can receive a signal within 10 metres
Pairing the unit with a bluetooth device to listen to music:
Press the DOCK button on the remote control to select iPod/Bluetooth mode.
1.
2. Press and hold the
sound twice. Power indicator will flash blue. The system has entered into pairing mode
and becomes discoverable.
3. Activate your bluetooth device and select the search mode.
4. "SBTD3012" will appear on your bluetooth device.
5. Select "SBTD3012" and enter "0000" for the password if necessary.
If the signal strength is weak, your bluetooth receiver may disconnect, but it will re-enter pairing mode
automatically.

AUX IN operation

Before connecting to the mains socket, use a 3.5mm AUX IN cable (not included) to
1.
connect your audio device through the AUX IN socket at the rear of the unit.
2. Connect the mains adapter to the unit and then the mains socket.
Press the AUX button to select AUX mode. The power indicator will light up orange.
3.
SBTD3012_IB_RC_120912_Zell.indd 13
/ PAIR button on the remote control until you hear a "beep"
13
12/9/12 5:04 PM