NetModule NB1600 User Manual page 43

The access point networks can be bridged to any LAN interface for letting WLAN
clients and Ethernet hosts operate in the same subnet. However, for multiple SSIDs we
strongly recommend to set up separated interfaces in routing-mode in order to avoid
unwanted access and traffic between the interfaces. The corresponding DHCP server for
each network can be configured in afterwards as described in chapter 5.7.2.
Network mode: Choose whether the interface shall be operated bridged or in routing-
mode
Bridge interface: If bridged, the LAN interface to which the WLAN network should be
bridged
IP address / netmask: In routing-mode, the IP address and netmask for this WLAN
network
NB1600 User Manual
43