Otto Bock Skippi Service Manual page 38

Now remount the protective glass: Insert the lower nose in the notch and let the upper nose
engage with light pressure.
Replacing Defective Lamps, Rear Lights
Remove the protective glass of the rear lights: Using a small flathead screwdriver, loosen the
two screws on the left and right and remove the protective glass.
Remove the lamp from the holder and replace it with a new one. Make sure that the lamp is
correctly seated in the holder.
Note!
When reinserting the protective glasses, make sure they are seated correctly on the housing
and ensure that the screws are firmly tightened in order to prevent moisture from entering
the lamps.
36