Otto Bock Skippi Service Manual page 25

By loosening the screws on the telescoping footrest tube at the front and rear, the footplate can
be adapted to the lower leg length and to the thickness of the child's seat cushion.
To set the lower leg length you need a 3 mm Allen wrench.
Front screw for lower leg length setting Rear screw for lower leg length setting
Ensure that the telescoping tubes of both footrests are set equally. Use a folding ruler, if neces-
sary.
The angle of the footplate can be changed by loosening the attachment screw on the rear side
of the footrest bar. Again, you need a 3 mm Allen wrench.
Setting the angle
Make sure to firmly retighten the screw connections after all adjustments.
23