Max Cleaning - Samsung SR8980 User Manual

Max Cleaning

The Robot vacuum automatically moves and cleans until the
battery runs out and the battery level flashes only one level.
■ If cleaning begins when the Robot vacuum is docked with the
Charger (Station), the time to return to the charger (station) is
decreased since the Robot vacuum remembers its original position
while moving.
■ If the Robot vacuum starts the current cleaning run at a location other
than the Charger (Station) and fails to locate the Charger (Station)
while cleaning, it will stop near the location where it started cleaning.
■ If the battery level becomes low while cleaning, the Robot vacuum
automatically returns to the Charger (Station) and resumes cleaning after charging the battery.
(Number of resumed cleaning operations: Once)
Main unit button
▶
3time
2 times in charging mode
About the Resume Cleaning function
• If the Robot vacuum judges cleaning to be complete,
resume cleaning is not performed.
• If you move the Robot vacuum while it is being charged
NOTE
or press a button, Robot vacuum judges cleaning to be
complete (cleaning is not resumed).
• Do not move the Robot vacuum while it is cleaning or press
a button while cleaning. Otherwise, the Robot vacuum
judges cleaning to be complete and starts cleaning again
CAUTION
from the beginning.
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
Turbo icon is turned on, you can start cleaning in Turbo
mode.
• Each time you press the Dust Sensor button, the Dust
Sensor icon on the display panel is turned on or off
sequentially. When the Dust Sensor icon is turned on, you
can start cleaning in Dust Sensor mode.
Remote control
button
1. Set the mode.
2. Cancel the mode.
Configuration
Sequence
Dust Sensor Mode
Normal Mode
Turbo Mode
operating _33