Remote Control - Samsung SR8980 User Manual

■ Remote Control

Power
Auto
Directional
Buttons
(moving backwards is not
supported.)
Manual
Turbo/Silence
■ Installing the Remote Control Batteries
Batteries are not installed in the remote control when purchasing the product.
Install the batteries (type AAA) before use.
1
Lift the battery compartment
cover at the back of the
remote control, while
pressing the locking tab.
2
Install the batteries into the
remote control as shown by
the figure below.
(If the batteries are installed
with the wrong polarity, the
remote control will not work.)
Recharging
Max
Spot
Start/Stop
Dust Sensor
Sound/Remote
Clock
Schedule
3
After inserting the tip of the
cover into the slot, push the
other end to close it until it
clicks into place.
❈ Specification: AAA type batteries
assembling _19