Spot Cleaning - Samsung SR8980 User Manual

Spot Cleaning

You can conveniently clean a specific area that has a a lot of
cookie crumbs, dust, and etc.
■ Move the Robot vacuum to the location where you want to perform a
spot clean.
Main unit button
▶
2time
- In Spot cleaning mode, the Robot vacuum cleans an area with a
length of 1.5m and a width of 1.5m.
- When cleaning is completed, the Robot vacuum will display End,
Stop, and Stand by.
When the Robot vacuum is docked with the Charger (Station)
spot cleaning is not supported.
NOTE
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
CAUTION
Turbo icon is turned on, you can start cleaning in Turbo
mode.
• Each time you press the Dust Sensor button, the Dust
Sensor icon on the display panel is turned on or off
sequentially. When the Dust Sensor icon is turned on, you
can start cleaning in Dust Sensor mode.
32_ operating
Remote control
button
1. Set the mode.
2. Cancel the mode.
Configuration
Sequence
About 1.5m
Normal Mode
Turbo Mode
Dust Sensor Mode
Cleaning Complete