Max Cleaning - Samsung SR8930 User Manual

max Cleaning

the vacuum cleaning robot automatically moves and cleans until
the battery runs out and the battery level flashes only one level.
■ If cleaning begins when the vacuum cleaning robot is docked with
the charger station, the time to return to the charger is decreased
since the vacuum cleaning robot remembers its original position while
moving.
■ If the vacuum cleaning robot starts the current cleaning run at
a location other than the charging station and fails to locate the
charging station while cleaning, it will stop near the location where it
started cleaning.
■ If the battery level becomes low while cleaning, the vacuum cleaning robot automatically returns
to the charger station and resumes cleaning after charging the battery. (Number of resumed
cleaning operations: Once)
main unit button
▶
3time
2 times in charging mode
About the Resume cleaning function
• If the vacuum cleaning robot judges cleaning to be
complete, resume cleaning is not performed.
Note
• If you move the vacuum cleaning robot while it is being
charged or press a button, vacuum cleaning robot judges
cleaning to be complete (cleaning is not resumed).
• Do not move the vacuum cleaning robot while it is cleaning
or press a button while cleaning. Otherwise, the vacuum
cAutIoN
cleaning robot judges cleaning to be complete and starts
cleaning again from the beginning.
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
Turbo icon is turned on, you can start cleaning in Turbo
mode.
30_ operating
Remote control
button
1. Set the mode.
2. Cancel the mode.
configuration
Sequence
normal mode
turbo mode