Max Cleaning - Samsung sr8894 User Manual

Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER

MAx CLEANING

The robotic vacuum cleaner automatically moves and
cleans until the battery runs out and the battery level
flashes only one level.
If cleaning begins when the robotic vacuum cleaner is docked
■
with the charger station, the time to return to the charger is
decreased since the robotic vacuum cleaner remembers its
original position while moving.
If the battery level becomes low while cleaning, the robotic
■
vacuum cleaner automatically returns to the charger station and resumes cleaning after
charging the battery. (Number of resumed cleaning operations: Once)
Main unit button
▶
3times
About the Resume Cleaning function
●
If the robotic vacuum cleaner judges cleaning to be
NOTE
complete, resume cleaning is not performed.
●
If you move the robotic vacuum cleaner while it is being
charged or press a button, robotic vacuum cleaner judges
cleaning to be complete (cleaning is not resumed).
●
Do not move the robotic vacuum cleaner while it is cleaning
or press a button while cleaning. Otherwise, the robotic
CAUTION
vacuum cleaner judges cleaning to be complete and starts
cleaning again from the beginning.
●
When you press the Turbo remote control button, either On
turbo (
the display panel in turns. When On turbo is displayed, you
can clean the floor in Turbo Mode.
●
When you press the Edge remote control button, On Edge
(
display panel in turns. When On Edge is displayed, you can
clean the floor in Edge Mode.
●
If you select both Turbo Mode and Edge Mode at the same
time, the (
turns.
32_ Operating the cleaner
Remote control button
) or Off turbo (
) or Off Edge (
) is display on the display panel in
→
Configuration Sequence
1
Set the mode.
2
Cancel the mode.
) is displayed on
) is displayed on the
Normal Mode
Turbo Mode
Edge Mode