Page 1
SR895* Vacuum Cleaning Robot user manual ✻ Before operating this unit, please read the instructions carefully. English ✻ For indoor use only. imagine the possibilities Thank you for purchasing a Samsung product.
Page 2
safety information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this manual. WARNING CAUTION/WARNING SYMBOLS USED Indicates that a danger of death or serious injury exists.
Page 3
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM CLEANING ROBOT. Unplug from outlet when not in use and before conducting maintenance. WARNING: to reduce the risk of fire, electric shock, or injury: GENERAL •...
Page 4
safety information VACUUM CLEANING ROBOT • Do not pick up hard or sharp objects such as glass, nails, screws, coins, and etc. • Do not use without a filter in place. When servicing the unit, never put fingers or other objects into the fan chamber in case the unit accidentally turns on.
contents SAFETY INFORMATION 06 Power Related 07 Before Use 10 In Use 11 Cleaning and Maintenance PRODUCT FEATURES ASSEMBLING THE CLEANER 15 Components 16 Name of each part OPERATING THE CLEANER 20 Installing the vacuum cleaning robot Installation order Turning the Power Switch on or off Installing the charger Charging About the Battery...
safety information POWER RELATED Do not bend the power cord forcefully or place a heavy object on it that could break it. WARNING - This may result in fire or electric shock. Make sure to remove any dust or water from the power plug. WARNING - Failing to do so may result in a malfunction or electric shock.
BEFORE USE Before activating the vacuum cleaning robot, make sure that the dust bin is assembled. CAUTION - If the dust bin is not inserted, vacuum cleaning robot will not operate. Never use vacuum cleaning robot in locations with combustible material such as.
Page 8
Remove small objects or brittle items from the area to be cleaned in advance. CAUTION - Make sure to clear any objects before cleaning. - Make sure to remove fragile items such as china, glass objects, flowerpots, etc. - Vacuum cleaning robot does not recognize coins, rings or other valuable items such as jewelry.
Page 9
Install the charger in a location that can be easily accessed by the vacuum cleaning robot. CAUTION - If the charger is installed in a corner, this may cause extra movements and may disturb the automatic recharging process. Objects in front of the charger will prevent the vacuum cleaning robot from auto-charging itself.
IN USE You cannot use the vacuum cleaning robot on thick carpets. CAUTION - This may result in problems with the vacuum cleaning robot. - This may result in damage to carpets. Do not use the vacuum cleaning robot on a table or other high locations.
Do not move the robotic vacuum cleaner holding the dustbin part. CAUTION - This may cause the dustbin to separate, resulting in injury or serious damage to the product. Vacuum cleaning robot may not be able to continue its operation if it is stuck at the entrance or veranda doorsill. NOTE - To resume operating, turn the Power Switch off and then on again after moving it to a location where it can continue cleaning.
Page 12
- Failing to do so may result in fire or electric shock. Before cleaning the charger, make sure to disconnect the power cord for safety. WARNING Contact the Samsung Electronics customer care center to replace the battery. WARNING - Failing to use original batteries will result in product failure.
product features CONVENIENT VIRTUAL GUARD FUNCTION You can confine the vacuum cleaning robot to a particular section by using the Fence (virtual wall) mode. • What is ceiling shape recognition (Visionary mapping plus™)? This function recognizes the shape of the ceiling using the camera on top to identify the area to be cleaned and determines the best way to pass over and clean every section of the floor.
Page 14
AUTO CHARGING When the battery is low, the vacuum cleaning robot is automatically guided to the charger to enable it to perform a quick auto charge. EDGE-CLEANING SIDE ROTATING BRUSH The edge-cleaning side rotating brush cleans dust from the edges. DOORSILL CROSSING The vacuum cleaning robot innovative driving system makes it possible for it to cross over doorsills with a height of about...
assembling the cleaner COMPONENTS ■ Main Body ■ Remote Control ■ Charger (Station) ■ Others Components (AAA-Type Batteries) User Manual / VIRTUAL GUARD Spare filter Cleaning Brush Quick Start Guide 2 Battery ❈ Mesh and Sponge filters are not included in spare filters. assembling _15...
NAME OF EACH PART ■ Main unit Dustbin Eject Button Display panel Virtual Guard Sensor Camera Remote Control Sensor Obstacle Sensor Obstacle Sensor Bumper Sensor Front Dustbin Eject Button Dust bin Remote Control Sensor Side Cliff Sensor Driving Wheel Rotating Side Brush Power Switch Charge Pin Power Brush...
Page 17
■ Charger (Station) Charging lamp (green) Power lamp (red) Cord winder Charging terminals Front Back ■ VIRTUAL GUARD Power Button Lamp Main Body Detection Sensor Distance Detection Sensor ■ Installing the batteries Batteries are not supplied with the product. You have to purchase the batteries separately. Install the batteries (type D) before use.
Page 18
■ Remote Control Power Recharging Auto Directional Spot Buttons (moving backwards is Start/Stop not supported.) Manual Dust Sensor Turbo/Silence Sound/Remote Clock Schedule ■ Installing the Remote Control Batterise Batteries are not installed in the remote control when purchasing the product. Install the batteries (type AAA) before use.
Page 19
■ Display panel DISPLAY PART 1. Number Display - Shows the timer display, progress status, and error codes using numbers, letters and graphics. 2. Weekly Reservation - When you set a weekly reservation to start cleaning from the specified time on the specified day of the week, the icon for the selected day of the week is turned on.
operating the cleaner INSTALLING THE VACUUM CLEANING ROBOT Installation order 1. Turning the Power Switch on or off To use the vacuum cleaning robot, you must turn on the Power Switch at the bottom of the main unit. 2. Installing the Charger To charge the vacuum cleaning robot, you must first install the charger.
Page 21
Installing the charger Charging lamp Power lamp 1. Install the charger on a flat surface. 2. There should be no obstacles and cliffs 0.5m to the left and right and within 1 m of the front. 3. Install the charger in a location where it can be easily accessed by the vacuum cleaning robot.
Charging When the product is initially purchased, the battery is fully discharged, and you must charge the vacuum cleaning Charging lamp Power lamp robot manually. Turn on the Power Switch at the bottom of the product. 1. After aligning the charge pins of the main unit with the charge pin of the charger station, press the main Power lamp Charging lamp...
( ) and model number before purchasing it. - This battery is only for Samsung vacuum cleaning robot. It is strictly prohibited to use it for other appliances or for other purposes. - Do not disassemble or modify the battery.
Setting the Time The clock displays the current time. You can change the current time with the following steps. ■ You can only set the time using the remote control. Remote Control Configuration Sequence Blinks 1. Press the Clock button. - The current time is displayed.
Installing the VIRTUAL GUARD You can confine the vacuum cleaning robot to a Power Button particular section by using Fence (virtual wall) mode. Lamp Main Body Detection Distance Sensor Detection Sensor Button operations 1. Lamp operations - Fence (virtual wall) Mode: The red lamp flashes. - Off :The lamp is turned off.
Page 26
About the IrDA sensor • The infrared signal transmission may not be [Infrared Signal Priority] smooth in locations exposed to halogen lamps or CAUTION in outdoor locations. > > • Vacuum cleaning robot uses 3 types of infrared devices and a device may not work in front of another device with a higher priority.
USING THE VACUUM CLEANING ROBOT Starting/Stopping Cleaning You can run or stop all vacuum cleaning robot functions. ■ Each vacuum cleaning robot function only runs when the Power Switch is turned on. ■ When the vacuum cleaning robot is operating, press the ( button to cancel the operation and select a function.
Recharging You can have the vacuum cleaning robot return to the charger to charge the battery by using the Recharging button. ■ When the vacuum cleaning robot is operating, press the ( button to cancel the operation and press the Recharging button. 1.
Auto Cleaning The vacuum cleaning robot will move by itself and automatically clean the house until cleaning is completed once. ■ If you press the Start/Stop button on the main unit or remote control without selecting a cleaning mode, an automatic cleaning run starts. ■...
Spot Cleaning You can conveniently clean a specific area that has a a lot of About 1.5m cookie crumbs, dust, and etc. ■ Move the vacuum cleaning robot to the location where you want to perform a spot clean. Remote control Configuration Main unit button button...
Max Cleaning The vacuum cleaning robot automatically moves and cleans until the battery runs out and the battery level flashes only one level. ■ If cleaning begins when the vacuum cleaning robot is docked with the charger station, the time to return to the charger is decreased since the vacuum cleaning robot remembers its original position while moving.
Manual Cleaning You can move the vacuum cleaning robot to clean a particular location directly by using the remote control. ■ Move the vacuum cleaning robot to the location where you want to perform manual cleaning. ■ You can manually clean using the remote control only. Remote control button Configuration Sequence 1.
Timer Reservation In this mode, you can schedule the cleaner to start a once-off cleaning run from a particular time. ■ A scheduled cleaning run is only performed when the cleaner is docked to the charger station. Remote Control Configuration Sequence 1.
Weekly Reservation In this mode, you can schedule the cleaner to start a once-off cleaning run from the specified time on the specified days of the week. ■ A scheduled cleaning run is only performed when the cleaner is docked to the charging station. Remote Control Configuration Sequence Standby mode...
Page 35
Remote Control Configuration Sequence 4. Press the Schedule button. Blinks Press the or button to Decrease Increase set the cleaning mode. - You can select either Auto or Blinks Repeat cleaning mode. 5. Press the Schedule button. - The value you set blinks and the settings are completed.
ADDITIONAL FUNCTIONS Using additional functions You can use the cleaning robot more easily and conveniently using various additional functions. ■ You can only configure the additional functions with the remote control. Turbo Mode Each time you press the Turbo button, the Turbo icon on the display panel is turned on or off sequentially.
maintain tools and filters CLEANING THE VACUUM CLEANING ROBOT Please keep the cleaning and maintenance methods in mind ■ When the Power Switch is damaged, please contact the service agent so that it does not cause any accidents. ■ Do not use any means or mechanical devices not installed by the manufacturer that could accelerate the deformation of the vacuum cleaning robot.
Cleaning the Dust Bin and the Filters First, empty the dust bin before cleaning it. ■ When separating the dust bin, take care not to spill the dust out of the dust bin. ■ Empty the dust bin in the following cases. 1.
CLEANING THE VACUUM CLEANING ROBOT Cleaning the Power Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot. • Because the dust in the dust bin may come out, separate the dust bin first before cleaning the power brush.
Page 40
4. After a cleaning run, first fix the side of the power brush opposite to the Power Switch and then fix the other side. 5. Insert the side into the two grooves and assemble it by slightly sliding it down until it clicks into place. •...
Cleaning the Edge-Cleaning Side rotating Brush You must turn off the Power Switch at the bottom of the main unit before cleaning the vacuum cleaning robot. 1. Check whether the side rotating brush is bent or whether there are any foreign substances stuck on the brush. 2.
Cleaning the Driving Wheel You must turn off the Power Switch at the bottom of the main unit before cleaning the robot. ■ If the vacuum cleaning robot suddenly starts to zigzag, there may be foreign substances stuck on the driving wheel. 1.
troubleshooting CHECKLIST BEFORE SVC CALLS Symptom Checklist Measure to Take Vacuum cleaning • Is the dust bin assembled? • Install the dust bin. robot does not • Is the Power Switch turned on? • Turn on the Power Switch. operate at all before cleaning.
Page 44
Symptom Checklist Measure to Take Vacuum cleaning • Check whether the power plug of robot cannot find the the charger is plugged correctly charger. into the outlet. • If there are any obstacles within a range of about 1m in front of the charger and about 0.5m range to the left and right of the charger, you should remove the obstacles.
TROUBLESHOOTING FOR ERROR CODES ERROR CODE CAUSE SOLUTION • Vacuum cleaning robot is • Turn off the Power Switch at the bottom and caught, stuck or trapped move the vacuum cleaning robot to a different while navigating. location. • A foreign substance (string, •...
Page 46
product specification 80 mm (Height) 122 mm (Height) 350 mm (Length) 350 mm (Width) 161 mm (Length) 275 mm (Width) Main Body Charger(Station) Classification Item SR8950* SERIES Diameter 350mm Mechanical Height 80mm Specifications Weight 3.2kg Power voltage AC220-240V~, 50-60Hz Charge power consumption 40 W Electrical Specifications...
Page 47
OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate source code covered under the BSD. And this software is based in part on the work of the Independent JPEG Group. ■ OpenCV : IMPORTANT : READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING. By downloading, copying, installing or using the software you agree to this license.
Page 48
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center Web Site AUSTRALIA 1300 362 603 www.samsung.com www.samsung.com/hk HONG KONG (852) 3698-4698 www.samsung.com/hk_en/ MALAYSIA 1800-88-9999 www.samsung.com...