Remarks And Recommendations - Samsung SR8980 User Manual

REMARKS AND RECOMMENDATIONS

Video Streaming
The video streaming feature requires an upload speed around 1Mbps or more. To ensure the non-
interrupted service, you can allocate enough bandwidth to Robot Vacuum's IP if your wireless router
supports Quality of Service settings. Please refer to an advanced setting section of the user manual
for your wireless router. It is important to note that many factors can affect speeds including volume of
internet traffics, your equipment, location, etc.
Wi-Fi Range Extension
You can install any additional wireless router (repeater or extender) to extend the range of your existing
Wi-Fi network for Robot Vacuum. However, both routers should use the same SSID, password,
authentication, and encryption. A certain wireless repeater can be automatically configured using the
same options as the main router by default. If not, please make sure that your candidate device provides
settings to freely configure those options. We recommend a simple wireless repeater that doesn't have a
DHCP server feature or a MAC address alteration feature. The transition time between adjacent wireless
networks will be around 1 to 2 minutes.
Firewalls
Please note that some routers come with a built-in firewall. Under firewall environments, you will
experience slow-down in your connection or even encounter failure to connect the streaming service of
Robot Vacuum. If you want to enhance the performance in such cases, you can disable the firewall at
your own risk.
Data Usage
If you don't have an unlimited data plan, you should carefully monitor the usage while using the streaming
service of Robot Vacuum. It consumes around 1Gbyte of your data if you stream 10 minutes per day for a
month.
Automatic Return
In idle mode, the Robot Vacuum will automatically go back to the charger unless any command is
executed for more than 15 minutes or the video streaming is progressed.
Software Update
When you reset the Robot Vacuum and keep it connected to the charger, it will check to see if any
firmware update is available. If there is an update available, it will be automatically downloaded and
updated. Please note that the emergency switch is located on the bottom side of the cleaning robot.
Samsung Smart Home App _53