Setting the Time
The clock displays the current time. You can change the current time
with the following steps.
■ You can only set the time using the remote control.
Blinks
Canceling the Settings
Remote Control
26_ operating
Blinks
Blinks
Blinks
- Press the Start/Stop button to cancel the settings and exit
Time Set mode.
- If there is no input for 1 minute while you are setting the time,
the cleaner exits Time Set mode automatically.
Remote Control
Decrease
Increase
Decrease
Increase
Configuration Sequence
1. Press the Clock button.
- The current time is displayed.
2. Press the Clock button. Press
the or button to set the
hour.
3. Press the Clock button. Press
the or button to set the
minutes.
4. Press the Clock button.
- The value you set will
blink and the settings are
completed.