Spot Cleaning - Samsung SR8930 User Manual

Spot Cleaning

you can conveniently clean a specific area that has a a lot of
cookie crumbs, dust, and etc.
■ Move the vacuum cleaning robot to the location where you want to
perform a spot clean.
main unit button
▶
2time
- In Spot cleaning mode, the vacuum cleaning robot cleans an area
with a length of 1.5m and a width of 1.5m.
- When cleaning is completed, the vacuum cleaning robot will
display End, Stop, and Stand by.
When the vacuum cleaning robot is docked with the charger
station, spot cleaning is not supported.
Note
• Each time you press the Turbo button, the Turbo icon on
the display panel is turned on or off sequentially. When the
cAutIoN
Turbo icon is turned on, you can start cleaning in Turbo
mode.
Remote control
button
1. Set the mode.
2. Cancel the mode.
configuration
Sequence
Cleaning Complete
about 1.5m
normal mode
turbo mode
operating _29