Convenience Closing Feature - Mercedes-Benz S-Class Coupe Operator's Manual

Convenience opening (Coupe)
General notes
If the SmartKey is in close proximity to the vehi-
cle, the convenience opening function is availa-
ble.
You can ventilate the vehicle before you start
driving.
To do this, the SmartKey is used to carry out the
following functions simultaneously:
unlock the vehicle
R
open the side windows
R
switch on the seat ventilation for the driver's
R
seat
The "convenience opening" feature is also avail-
able when the vehicle is unlocked.
Convenience opening
Keep the % button pressed until the side
X
windows are in the desired position.
To interrupt convenience opening: release
X
the % button.
Convenience closing (Coupe)
Important safety notes
G
WARNING
When using the convenience closing feature,
parts of the body could be trapped in the clos-
ing area when a side window is being closed.
There is a risk of injury.
Observe the complete closing procedure
when the convenience closing feature is oper-
ating. Make sure that no body parts are in
close proximity during the closing procedure.
When you lock the vehicle, you can close the
windows at the same time.
You can then close the roller sunblinds.
i
Notes on the automatic reversing feature
for:
the side window (
R
the roller sunblind (
R
page 91)
Y
page 98)
Y
Using the SmartKey
Press and hold the & button until the side
X
windows are fully closed.
Make sure that all the side windows are
X
closed.
Press and hold the & button again until the
X
roller sunblinds of the panorama roof close.
To interrupt convenience closing: release
X
the & button.
Using KEYLESS-GO
The SmartKey must be outside the vehicle. All
the doors must be closed.
Touch recessed sensor surface : on the
X
door handle until the side windows are fully
closed.
i
Make sure you only touch recessed sensor
surface :.
Make sure that all the side windows are
X
closed.
Touch recessed sensor surface : on the
X
door handle again until the roller sunblind of
the panorama roof closes.
To interrupt convenience closing:release
X
recessed sensor surface : on the door han-
dle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
Close all the doors.
X
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Cabriolet: close the soft top (
X
Side windows
page 95).
Y
Z
93