At First Glance - Dataton PICKUP Production Manual

1...

AT FIRST GLANCE

Infrared transmitter/receiver. PICKUP uses infrared signals to communicate with IR HOTSPOT
TRANSPONDER units. Transponders are mounted next to points of interest in the audio tour.
When you charge the PICKUP or transfer audio files, the LED will flash.
Volume control. Twist the ring on the IR transmitter/receiver for volume control.
Built-in loudspeaker. A small loudspeaker is located behind the display. The loudspeaker
may be used as an alternative to headphones.
Action button/Display. There is a single control button to start, stop, pause and select audio.
The button features an illuminated display, reminiscent of a clockface, with 12 indicators
and a light in the middle. You turn the button clockwise or anti-clockwise to access special
functions in the audio guide.
Base. The base may be unscrewed and removed to change the memory card or battery.
This is usually performed by an authorized PICKUP maintenance facility.
Headphone jack and USB connector. The jack is suitable for regular 3.5 mm headphones.
Connect a headphone splitter if you want to use two pairs of headphones on the same
PICKUP. The USB cable, shipped with PICKUP, plugs into the base of the PICKUP and con-
nects to a USB port on your computer. Use the USB connection to transfer audio files and
charge the audio guide. The headphone/USB connector also fits the PICKUP CHARGER,
actual
size
letting you download files and charge up to 25 audio guides at a time.
5 |
1 . AT F I R S T G L A N C E