Dataton PICKUP Production Manual page 27

2 8 |
P I C K U P – P R O D U C T I O N G U I D E
aSSiGn name and tracK numBer to fileS
Once you have entered the correct transponder number
to each file, it's time to assign names and track numbers
to the individual files. Names are used to make it easier
to recognize files when you add more instructions later
on. The track number decides the playing sequence for
the files. You need to enter the track number but you don't
have to enter the total number of tracks. Enter the name
and track number even if there is only one file associated
with a transponder. If you only have one file
associated with a transponder, enter 1 in
Track Number. If you have several files on
the same transponder, set the order of play
in the Track Number field.
Note >
When you enter new names and
track numbers in the iTunes information
dialogue, you also change the name of
the actual file as seen on your computer.
The file name is changed to reflect the one
assigned in iTunes and the track number
is shown first. The file name for the first file
above will be:
01 Professor on hewing techniques.mp3