Dataton PICKUP Production Manual page 36

Radio
Value: [MHz]. A pre-selected FM channel will start playing via the built-in FM receiver. The
channel may be defined as a transmission frequency, format: XXX.XX.
Note >The audio file containing the command will not be played back at all. Therefore, if
you want a pre-recorded file to be played before the audio content from the FM transmitter
starts, (such as: "And now, over to our local radio station") this has to be stored in a sepa-
rate file assigned to the same transponder and with a lower track number.
Example > R 91.2 plays FM radio on 91.2MHz.
If you enter Radio on its own, without any value, the PICKUP will simply use the most recent
frequency setting.
Note >
Listening to radio has no known duration, which means the progress display (see
page 3) can't be used in the action button. Instead, the antenna icon is shown.
Several local commandS in tHe Same Sound file
Local commands are more the exception than the rule and should be used sparingly in most
installations. In some special cases, you may want to use several commands for the same
sound file. Separate the commands with a semi-colon and follow these two basic rules:
1) Do not use the same command twice in a sound file as the result will not be predictable.
2) The commands may be entered in any order.
Several GenreS in tHe Same Sound file
A sound file may be related to several genres, for example, English and Swedish. The
genres are entered manually, separated by commas.
3 7 |
5 . P R E PA R I N G A U D I O F I L E S I N I T U N E S