8 . C L O N I N G T H E M A S T E R P I C K U P - Dataton PICKUP Production Manual

7... CLONING CONTENT FROM A MASTER PICKUP
You can easily clone the contents of a single master PICKUP to a further 25 PICKUP units via
the charger/storage unit.
1) Plug in and power the charger using the power adapter shipped with the charger. A red
light glows on the DC cable port.
Please note > Always use the original Dataton power adapter which is shipped with
the charger. Using any other cable may cause permanent damage to the charger and the
PICKUP units.
2) Connect the master PICKUP with the USB cable (included with PICKUP). This cable is also
used to connect the PICKUP to the computer.
3) There is a concealed security switch in the countersunk hole to the right of the DC port.
3 9 |

8 . C L O N I N G T H E M A S T E R P I C K U P