Slideout / Leveling; Slideout Room Operation - Winnebago Cambria Owner's Manual

SECTION 10 SLIDEOUT / LEVELING

SLIDEOUT ROOM OPERATION

The slideout living room provides a spacious
living area at the push of a button. The slideout
room is extended and retracted using a motorized
mechanism with an electronic control system.
The slideout room system uses a 12-Volt DC
motorized room mechanism to insure smooth
operation and positive weather seal.
The main slideout control switch is located
near the entrance door or Systems Monitor Panel.
If your model is equipped with a rear slideout
room, the switch will be located on a wall in or
near the bedroom.
Slideout Switches (typical)
Your coach may have one or more of these switches
depending on model, options and available equipment.
NOTE: We recommend that you KEEP THE
ENGINE RUNNING WHILE
EXTENDING OR RETRACTING
SLIDEOUT ROOMS so the engine
alternator can provide maximum power
for proper operation of the slideout
mechanisms.
Travel Strap
The travel strap must be released before
extending the room or damage to the coach will
result.
The travel strap is designed only to help keep
the room extension secured against the coach
sidewall to maintain an effective weather seal
while the vehicle is in motion. It is not designed
to withstand the force exerted by the room
extension mechanism and will not prevent
accidental extension of the room.
The travel strap is located near the floor at the
front end of the slideout room.
To Release:
• Pull the strap buckle outward and up to release
tension on strap.
• Pull a short length of the excess strap back
through the buckle to provide sufficient slack.
• Unhook the strap end peg from the mooring
bracket on the floor and wall edge. Store strap
in location of your choice. (Under the couch is
one choice.)
To Fasten Strap:
• Hook the strap end peg into the mooring
bracket.
.
10-1