Winnebago Cambria Owner's Manual page 75

Table
Bracket
2. Make sure that the table leg is secured into the
floor support bracket and the leg brace is
locked.
3. Refit the seat support 'bumpers' onto the seat
frame.
Round Dinette/Bed Conversion -
Model 26A
The round dinette can be converted into
additional sleeping space when needed by
lowering the table and moving a cushion into
place as shown below.
1. Lower the drop leaf. See instructions
following these steps.
2. Get a partner to help you lift the table upward
off the support tubes and set the table
edgewise onto the floor to remove the table
leg tubes.
Wall
Support
FURNITURE & SOFTGOODS
3. Pull table tubes from the floor or table sockets
and store beneath dinette seat.
4. Place the table, 'flat' side outward, in the
'notch' - lowering it onto the table support
columns on the dinette seat face.
5. Place large, rounded back cushion into place
over the table to complete the bed cushion
conversion.
Reverse steps to reassemble to dinette
configuration.
Round Table Drop Leaf Extension
Lift the drop leaf extension upward, then
reach beneath the tabletop and slide the support
arms outward to hold the extension. Reverse
steps to lower the extension.
SECTION 9
9-3