Switching On Double Call; Switching Off Double Call; Pick-Up; General Pick-Up - Avaya 3725 User Manual

Note:
The double call feature must have been enabled.
Note:
If your cordless telephone is outside the range of the system or switched off, the
other telephone only will ring. The caller hears the ringback signal.
If you are telephoning on your cordless telephone, the caller may, depending on
the setting in the telephone system, hear either the ringback or busy signal. Ask
your system administrator for more details.

Switching on double call

1. Enter the code for double call, e.g. *34.
2. Press Off-hook key.
You will hear an acknowledgement tone.
3. Press On-hook key.
The following appears in the display: 3050>>7654

Switching off double call

1. Enter the code for double call, e.g. #34.
2. Press Off-hook key.
You will hear an acknowledgement tone.
3. Press On-hook key.

Pick-up

You may answer the call on your telephone when another telephone rings. If you are assigned
to a group, this also works in an undirected way for any telephone within the group.
There are specific feature access codes necessary to enable the pick-up options. Your system
administrator will inform you of the required codes.

General Pick-up

Another telephone rings.
1. Enter the code for undirected Pick-up, e.g. **.
2. Enter the number of the ringing telephone.
3. Press Off-hook key.
You are connected.
Avaya 3725 DECT Telephone at Integral Enterprise - User Guide
Calling
45
02/2009