Dial using Code Numbers
Within your telephone system, frequently used call numbers are stored centrally under specific
code numbers. You may dial any of these numbers by simply entering the respective code
number. The code for enabling code dialling in your telephone system is determined by the
system administrator.
1. Enter the code for code dialing, e.g. *7.
2. Enter the desired code number, e.g. 12. If the stored number is incomplete, enter the
subsequent numbers now!
3. Press Off-hook key.
Dial using Speed dial Code Numbers
You may assign important call numbers to the ten digit keys of your cordless telephone. This
reduces the number of digits you must press in order to dial this numbers.
Note:
Speed dial numbers must have been stored by using the key code sequence
Note:
given in
Speed Dialling
1. Press Off-hook key.
2. Select More.
3. Select Speed dial.
4. Enter the speed dial code number, e. g. 2.
The call number assigned to this speed dial code number is dialled.
During a Call
Note:
Some of these functions are system dependent and are not shown in the menu.
Note:
They are set up by your system administrator. If applicable additional functions
could be programmed.
Adjust the Volume during a Call
1. Press the Volume up button to increase the volume, and the Volume down button to
decrease the volume.
The telephone will now store and keep the new volume level.
40
Avaya 3725 DECT Telephone at Integral Enterprise - User Guide
Functions key code sequences
on page 89.
02/2009